UV Curing Equipment Dump Truck Line Double Light Water Line Curing Oven UV Tunnel Dryer UV Curing Machine

• Customization: Available
• After-sales Service: One Year
• Warranty: One Year
• Model NO.: ZS0018
• Name: UV Curing Machine
• UV Light Source: LED * 2 Sets, UV Mercury Lamp 8kw * 1 Set
• Total Length of UV Mercury Lamp: 950mm.80mn
• Operating Mode: Human Machine Interface Touch Screen Control
• Power Supply: 380VAC 50Hz
• Transport Package: Wooden Crate
• Specification: 2000*650*1650mm
• Trademark: no
• Origin: China
• Production Capacity: 500

Product Description

Product Description

1, Scope of application of UV curing machine:
Four lamp UV dryer is suitable for UV primer, topcoat, floor, furniture, cabinet board, glass, ceramic tile, metal plate, etc.
This equipment is mainly used for drying the paint of panel furniture, cabinet board, floor, metal plate and bamboo and wood blinds after UV coating;
2, Features of UV light fixing machine:
1. Instant drying, saving time and high production efficiency.
2. It can make the printing piece achieve high gloss, friction resistance and solvent resistance.
3. The conveyor belt has stepless speed regulation and anti offset device to ensure smooth transportation.
4. Each set of UV system is controlled independently, and the number of lamp tubes is turned on according to the production.
5. Special aluminum magnesium alloy lampshade is adopted, and the concentrating design is of high production efficiency.
6. The working current of UV lamp can be controlled by external indicator needle, which can effectively master the working state of UV machine.
7. Equipped with reasonable heat dissipation system, the dynamic temperature should be kept at ≤ 60 ° C.
8. The heat can be discharged from the outdoor through the heat removal system, and the production and working environment can be effectively protected.

 

Detailed Photos

                                   
                                                                               

Applicable industries: PCB UV curing machine, used for PCB green oil, three proof paint, three proof glue, UV glue bonding (for various electronic products such as speakers, cables, micro motor optical components, etc.). Curing of coatings (ink, paint, varnish). Printing (UV ink, varnish). Fluorescence analysis (necessary for material testing or coating penetration testing), etc Want to learn more about related information

1.Control interface, beginners can learn to operate the cylinder immediately in 2 minutes
2.Power 1KW2KW3KW,The width of the mesh belt is usually 300mm
You can also customize the size according to your needs
3.The W curing machine adopts a hood type furnace cover, which can be immediately opened to replace the lamp tube. If there is a fault, it is easy to check and repair

 

 

Product Parameters

SN.	UV Curing Oven	Specification
1	Application	UV ink, UV lacquering, UV glue curing. PC, ABS, Printing; PCB, Wood UV painting, Stone UV painting, furniture; light LED light; electronics
2	UV Lamp	Capacity: 2-3KW (as per target components) Life: 800 hrs UV radiation intensity: 70W/cm² UV radiation length: 300mm UV wave length: 365nm Input length:  400mm Out put length: 400 mm
3	Overall Dimension	L1250mm*W450mm*H1250mm L1250mm*W450mm*H1250mm
4	Power Supply	380V/50HZ/3-phase
5	Conveyor	Speed: 1-10mtrs/min Width: 300mm onwards
6	Distance between Lamp and Conveyor	50-120mm
7	Input / output Height Range	10~120mm
8	Air Circulation	Top suction & down draft
9	Safety Interlock for Exhaust Blower	Safety Thermostat to monitor the temperature
10	Control Panel	independent control, digital display
11	Temperature Indicator & Controller	PID with SSR Temperature is controller by Temperature controller cum indicator

 

Parameter
Model		HLC-LED-700		HLC-LED-330
LED UV Light Source		LED UV (imported lamp beads)		LEDUV*1/2/3/4/5/6 group
LED Lamp Surface		100~2000mm		330*24nm
Main Wave Peak		365/385/395/405nm		365nm
Control Method		HMI touch panel		normal button control
Cooling		cold water system		cold water system, Air cooling
Conveyor Width		100~2000mm		330mm
Entrance Height		20~200mm		50mm
Conveyor Speed		1~120m/min		0~5m/min
Input Power		380VAC 50Hz		220VAC 50Hz

 

 

Company Profile

 

FAQ

 

1.Provide pre-sale and after -sale technical consultation.

2.Provide 24 hours consultations technical support after sale.

3.Provide technical support for training technicians.

4.Provide technical consultation and support for mechanical equipment.

5.Provide UV equipment configuration improvement , installation proposal technical support.

6.In general, door-to-door service is not supported. If door-to-door service is required, a round-trip fee for personnel is required.

7.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service.