| Customization: | Available |
|---|---|
| After-sales Service: | One Year |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1, Scope of application of UV curing machine:
Four lamp UV dryer is suitable for UV primer, topcoat, floor, furniture, cabinet board, glass, ceramic tile, metal plate, etc.
This equipment is mainly used for drying the paint of panel furniture, cabinet board, floor, metal plate and bamboo and wood blinds after UV coating;
2, Features of UV light fixing machine:
1. Instant drying, saving time and high production efficiency.
2. It can make the printing piece achieve high gloss, friction resistance and solvent resistance.
3. The conveyor belt has stepless speed regulation and anti offset device to ensure smooth transportation.
4. Each set of UV system is controlled independently, and the number of lamp tubes is turned on according to the production.
5. Special aluminum magnesium alloy lampshade is adopted, and the concentrating design is of high production efficiency.
6. The working current of UV lamp can be controlled by external indicator needle, which can effectively master the working state of UV machine.
7. Equipped with reasonable heat dissipation system, the dynamic temperature should be kept at ≤ 60 ° C.
8. The heat can be discharged from the outdoor through the heat removal system, and the production and working environment can be effectively protected.
| SN. | UV Curing Oven | Specification |
| 1 | Application | UV ink, UV lacquering, UV glue curing. PC, ABS, Printing; PCB, Wood UV painting, Stone UV painting, furniture; light LED light; electronics |
| 2 | UV Lamp | Capacity: 2-3KW (as per target components) Life: 800 hrs UV radiation intensity: 70W/cm² UV radiation length: 300mm UV wave length: 365nm Input length: 400mm Out put length: 400 mm |
| 3 | Overall Dimension | L1250mm*W450mm*H1250mm L1250mm*W450mm*H1250mm |
| 4 | Power Supply | 380V/50HZ/3-phase |
| 5 | Conveyor | Speed: 1-10mtrs/min Width: 300mm onwards |
| 6 | Distance between Lamp and Conveyor | 50-120mm |
| 7 | Input / output Height Range | 10~120mm |
| 8 | Air Circulation | Top suction & down draft |
| 9 | Safety Interlock for Exhaust Blower | Safety Thermostat to monitor the temperature |
| 10 | Control Panel | independent control, digital display |
| 11 | Temperature Indicator & Controller | PID with SSR Temperature is controller by Temperature controller cum indicator |
| Parameter | ||||||
| Model | HLC-LED-700 | HLC-LED-330 | ||||
| LED UV Light Source | LED UV (imported lamp beads) | LEDUV*1/2/3/4/5/6 group | ||||
| LED Lamp Surface | 100~2000mm | 330*24nm | ||||
| Main Wave Peak | 365/385/395/405nm | 365nm | ||||
| Control Method | HMI touch panel | normal button control | ||||
| Cooling | cold water system | cold water system, Air cooling | ||||
| Conveyor Width | 100~2000mm | 330mm | ||||
| Entrance Height | 20~200mm | 50mm | ||||
| Conveyor Speed | 1~120m/min | 0~5m/min | ||||
| Input Power | 380VAC 50Hz | 220VAC 50Hz | ||||
Click to learn more......
| 1.Provide pre-sale and after -sale technical consultation. 2.Provide 24 hours consultations technical support after sale. 3.Provide technical support for training technicians. 4.Provide technical consultation and support for mechanical equipment. 5.Provide UV equipment configuration improvement , installation proposal technical support. 6.In general, door-to-door service is not supported. If door-to-door service is required, a round-trip fee for personnel is required. 7.Normal use of the machine quality problems limited free warranty for 1 to 5 years, lifelong maintenance services, parts of the parts of the supplier to provide free on-site service. |
){kind=link}